Magnetic keyboards
A conventional switch closes a metal contact. A magnetic switch has a small magnet that moves toward or away from a sensor, and the keyboard reads the distance continuously.
How it works
Each switch holds a magnet. A Hall effect sensor under it outputs a signal that changes with magnetic field strength, so the firmware knows how far the key is pressed, not just whether it is. Some newer designs use tunnel magnetoresistance (TMR) sensors, which respond to the same kind of field with different sensitivity and power characteristics.
Because the position is a number, the actuation point becomes a software setting rather than a mechanical property.
What this makes possible
Adjustable actuation
Set the point where a press registers, typically somewhere between about 0.1 mm and 4 mm, and often per key.
Rapid trigger
The key releases as soon as you lift a small distance, and re-registers when you press again, without returning to a fixed reset point. Try it in the demo on the home page.
Multiple actions per key
Some boards let one key do different things at shallow and deep presses.
Analog input
Games that support it can read how far a key is pressed, for example to emulate a gamepad stick.
Trade-offs
| Upside | Downside |
|---|---|
| Tunable feel and responsiveness | Very light settings can cause accidental presses |
| No contact to wear out in the switch itself | Features depend on firmware and software quality |
| Fast polling and reset behavior | Magnets are sensitive to nearby strong magnets and to build quality |
Some competitive games ban or restrict certain functions such as simultaneous opposite-direction inputs handled in firmware. Read a game’s rules before relying on a feature.